New 3D Black Eagle Remote Underground max 30 meters depth Miner Archaeological Treasure Seeker Visual Metal Detector
Product Introduction:
New 3D Large Range Scanner
It is a high-performance gold and silver dollar search device. This detector has a high level of sensitivity and stability compared to similar international products. In addition to the above features, another prominent feature of this product is its ability to recognize the type of metal, making it easy for you to find useful metal items, which is a function that other similar products in China do not have. After owning this detector, you can embark on treasure hunting activities in more places, searching for gold, silver, copper, and gemstones.
Specific functions:
It can accurately determine the burial position of objects and locate them.
It can also rely on a frequency regulator to identify the specific type of metal.
Search system: microcomputer processor control and reflection conductivity
Search range: 1200 meters
Detection depth: 30 meters
Power supply: 12.6V 2000mAh
Transmission frequency: 5.6-6KHz
Signal frequency: 360-440Hz
Detection type: gold, silver, copper, gemstone
Charging method: This instrument has a rechargeable battery installed and can be charged directly by connecting it to the charger. The charging time is 10-12 hours.
Power on test:
Turn on the switch between the host and the searcher, and the work indicator light on the searcher will flash; When selecting the copper gear on the host, the corresponding copper indicator lights on the searcher will light up. When selecting other silver, gold, and gemstone gear on the host in sequence, the corresponding indicator lights on the searcher will light up.
If a gear is selected on the host but the corresponding indicator light on the searcher is not on, it is possible that the host and searcher have insufficient battery and need to be charged.
If the above situation is normal, it indicates that the instrument is functioning properly and can be used with confidence.
Use of transmitter:
This is the power switch button (do not leave the switch on when the instrument is not in use)
Please select the metal you want to detect based on the metal you want to detect
Gold, Silver, Copper, and Diamond. Please be careful not to choose two metals at the same time, otherwise it may cause damage to the instrument and result in non warranty
Host usage:
Just turn on the power switch. You can detect by selecting the metal category based on the original category on the transmitter
Operation method:
Hang the host vertically at your waist, keeping it as parallel as possible to your legs. If you are operating the search device with your right hand, hang it on your right waist. If you are operating it with your left hand, hang it on your left side. Note: Remove metal items such as mobile phones and keychains.
2. The correct usage of the new 3D searcher:
Tilt the searcher up 1-3 degrees; When holding the searcher, grip your body tightly and do not shake it; When walking, pay attention to the scanning speed. If the speed is slow and the movement is not enough, it will not polarize the instrument. If the speed is too fast, it will hinder the detection of the detected object;
Because the handheld handle of the instrument can rotate freely, wind can interfere with the new 3D. So the instrument will be subject to certain interference when used in windy conditions. The effectiveness of this instrument is closely related to the operator's control skills in scanning.
Choose a comfortable position to stand on the ground, hold the instrument with your hands, and keep your elbows tightly against your sides. Attention: You must place this instrument in front of your body, allowing enough space for the receiving antenna to unfold, and tilt the antenna slightly downwards from the horizontal line. This angle is approximately between 7 and 10 degrees.
As mentioned above, hold the instrument and scan very slowly in an arc while rotating yourself. At this point, the detector's elbow should always be tightly pressed against both sides of the body, and should be rotated approximately 40 to 60 degrees. Attention: The detector must rotate slowly and maintain a stable body.
3. Standardize your scanning actions. Firstly, ensure that the receiving antenna is properly extended. Place the receiving antenna directly in front of you, at a 90 degree angle to your body, without tilting to the left or right.
When the antenna is aimed at the target object, the instrument will lock in, even if you cross the target and continue to detect. When you feel that this lock is effective, remember this direction. Then, move the instrument about 10 meters to the left or right and repeat the process of locking the target as mentioned earlier. Observing the locking direction this time, the intersection of the two directions is the burial position of the target object.
If you feel that there is still some deviation in the specific position measured earlier, you can lock it from another angle. If the target object is within about 10 meters, you should slowly and steadily follow one of the designated routes. When you pass the target object and are directly above it, the antenna of the instrument will sway on both sides. At this point, the measured position is very accurate.
Introduction to auxiliary detection methods
Box method
It is recommended to use the box method to narrow down the search range. This method can locate as accurately as possible. Approaching the target from four directions to obtain accurate and equal responses for precise target localization.
First, place the target on the ground, and then you can learn to adjust the product to point in the direction of the target. Therefore, a skilled operator typically sets sample targets, walks past targets placed on the ground, observes hit rates, adjusts instruments, and then continues to search parallel to the area after narrowing down the target range using the crossover method.
Once you follow this step, you can reduce the area to 20 feet or less. Then you can use a regular metal detector to complete the work. Some people who are quite proficient in using this product can almost accurately locate the target point to their feet. To achieve this level, it is recommended that you practice more frequently
){kind=link}