| Customization: | Available |
|---|---|
| Technology: | Infrared |
| Style: | Mini Camera |
|
Still deciding? Get samples of US$ 80/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
- It is simple to install, easy to use, fully wireless, no need to pull cables, and privacy cover to prevent hackers from intruding and prying into privacy.
-The image is clear and smooth, and the intelligent transmission exerts the limits of the network.
-The device can be waked up remotely, the head can be rotated 180° left and right by the mobile phone app, and the goggles can be up and down 75°
-Standard H.264:
1. Low code Rate
2. High-quality images.
3. Strong fault tolerance.
4. Strong network adaptability.
-Support remote monitoring, remote viewing, two-way voice intercom, echo cancellation, and noise suppression.
-Support Android, IOS smart terminal remote real-time monitoring
-200W HD pixels (1920X1080), clear picture quality
-Single light source night vision lighting (night vision distance 6 meters), infrared lamp fill light, realize night vision image effect.
-Built-in rechargeable lithium battery, long battery life, up to 2 months of normal work, 12 months of standby time.
-Support 2.4G Wi-Fi (IEEE802.11b/g/n)
-Support micro SD card (up to 128GB) storage, mobile phone recording
-Support point-to-point short-distance connection to the distribution network
-Support human body detection, intelligent push
-Detachable base, the base is pasted with non-slip pads.
| Main processor | SOC | Ingenic T31 | ||||
| DDR | 64M Bytes | |||||
| Image Sensor | Sensor | 1/2.9 color CMOS sensor | ||||
| IR-CUT | Color black and white switcher | |||||
| Lens | M12 f3.7MM F.2.0 2OOW | |||||
| Viewing angle | H (horizontal) 89 degrees; V vertical 52 degrees: D diagonally 108 degrees | |||||
| Minimum illumination | 0.01Lux | |||||
| Audio | input Output | Two-way voice intercom can be realized (built-in microphone and speaker) | ||||
| Audio compression method | G711A | |||||
| video | compression method | H.264 | ||||
| Lighting frequency | 50Hz | |||||
| Image frame rate | 20ps | |||||
| Maximum image resolution | 1920*1080P | |||||
| Night vision light source | 14mil infrared light (940nM wavelength), irradiation distance: 6 meters | |||||
| The internet | Wi-Fi | 2.4G Wi-Fi (IEEE802.11b/g/n), built-in antenna | ||||||
| supporting agreement | TCP/IP,UDP/IP,DHCP | |||||||
| Support IP address | Support wireless wifi, dynamic IP address | |||||||
| AI | Human detection | Support human body detection (4-5 meters), smart push, remote wake-up | ||||||
| Alarm method | Alarm notification | Mobile APP message push |
||||||
| wake | Wake-up method | PIR human body induction wakeup, remote active wakeup | ||||||
| Video | Video mode | Alarm trigger, manual recording, all day recording | ||||||
| Video storage | Local Micro SD card, mobile phone memory | |||||||
| Indicator light | LED indication | RGB three-color light, power/point-to-point mode/remote mode | ||||||
| Battery | capacity | 3000mah (protection mode: overcurrent/overdischarge/overcharge/short circuit/high and low temperature charging protection) | ||||||
| Detachability | Removable arm and base | |||||||
| usage time | 2 months (depending on the situation of wake-up) | |||||||
| Standby time | 1 year | |||||||
| Charging voltage | DV 5V+-5%/2A | |||||||
| Charging time | Within 6 hours | |||||||
| Power consumption | Standby power consumption | (3.7V 0.18mA) | ||||||
| Working power during the day | (3.7V 230mA) | |||||||
| Working power consumption at night | (3.7V 400mA) | |||||||
| interface | power supply | Type-C interface | ||||||
| SD card | 1 Micro SD card (up to 128GB) | |||||||
| Button | 1 reset button, 1 switch machine button |
|||||||
| Install method | Installation method | flat | ||||||
| environment | working environment | -10° ~ 45°C /0% ~ 80% (non-condensing) | ||||||
| Storage environment | -20°C ~ 60° /0% ~ 90% (no condensation) | |||||||
| Dimensions (LxWxH) | Body: 18cm (height) x 15cm (length) x 9cm (width) base size: Φ8.5CM | |||||||
| Specification | Net weight of bare metal | 403g | ||||||
| Finished product weight | 650g | |||||||
| Material + Craft | ABS | |||||||
| colour | Black and white/black gray | |||||||
){kind=link}