Voice Active Listening Device Bug + GPS GPRS GSM Tracker + Anti Theft Support Sos Urgent Call Back N11
Function :
This product uses the Taiwan technology, has a voice alarm function. Compact size, clear voice, long standby time, simple operation, stable performance, convenient installation. Can be used for remote monitoring, base station positioning and tracking. (such as: home monitoring, vehicle anti-theft tracking, child care.)
* boot: open the rear cover, put the NANO SIM card into the deck automatically boot, boot, light for 3 seconds, until the indicator light goes out, you can use the back cover (support SIM card: 2G GSM, 3G WCDMA /TD-SCDMA, 4G TD-LTE)
*Function: when the machines are in range to normal after 40 db volume, machine instantly trigger start alarm, number of binding, in turn, call or send text messages.
*Listen: monitoring after start-up, can be monitored in time of need can call the communication tools, wait a few seconds after the call is to know the location of the surrounding conditions within 10 meters.
Charging indicator light changes: When the host is charging, the indicator light will flash and turn off once; When fully charged, the indicator light stays on for a while and then goes off.
F. LBS Postion Support(The World can support)
Send " 234# "to the sim number and after return a url link and open it can show the following:
using methods:
A) Power on: open the deck lid,insert the SIM card follow the instructions in Figure deck automatically boot.
B) Alarm numbers binded:
i):Communications tools such as mobile phone call connection after 15 seconds,Machine itself through to hear the voice call is binding,Operation is very simple,This way every time should be rebound.
ii): text "alm12345" sent to the machine,the "12345" need be changed , the binded after a successful machine return to SMS, in turn, change the number of backwardness to the machine, can bind mutil numbers, alarm when the machine will in turn make binding number all the time, the number no longer after answering the call, After binding number this way, I) binding number expire, And the number of binding boot do not need to bind again next time.
iii) Key function: Short press to release, machine light flashes once, long press for 2-3 seconds,Releasing the machine will make an emergency call, and first send the location map to the first group of bound numbers, then loop through the first two groups of bound numbers. This button will hang up the call process in any call (incoming or outgoing) operation.
C) delete number :
Binding number for I) way, the card is automatically deleted, For ii) binding number, send "amov" delete all number,To end"amov12345"with"12345" to delete the specific number;
D) the query number :
Binding number for ii) way, send "achk" binding number query messages.
E) Send an "aget" to the machine, and the machine will voice monitor the callback binded Number and dial in sequence, stop looping after answering.
) Rights of privacy protection: send "safeon" open access, only by binding number into the machine, send "safeoff" close permissions, any number can be reached.
Edit message "IMEI#number#" (the number is 15 digits)send to the machine. return "IMEI number write ok."
F) remote control configuration:
1) to send "SMS" to machine, the machine alarm mode to reply messages
2) send the "call" to machine, alarm mode switch to a normal phone call
3)Send " 000# "to the machine turn off this feature;
4) Send " 111# " is open audio induction.
Frequency:
850MHZ, 900MHZ, 1800MHZ, 1900MHZ;
Standby time:
Acoustic alarm function on standby 4-5 days
Acoustic alarm function off standy 5-7 days
Specification:
A, product size: 4.50*3. 0*1.40 cm
B, working current: below 10 mA
C, idle current : below 0.05 mA
C, Decibel voice : 40 voice
Considerations:*When the battery is exhausted, connect the charger for 3 minutes to start charging;*The new machine needs to be fully charged before use to achieve the best effect;
* During installation, please pay attention to the GSM network strength and do not install it without signal Or where the signal is weak, so as not to affect the use effect or cannot be used;*If you can't get through the phone, plug in the card again and start up or test after charging;*Do not answer automatically, plug in the card and start up again;*If the battery is low, it will stop triggering the callback alarm and need to be charged before use;*If the charger cannot be connected for charging all the time, false alarm and automatic callback may occur.
){kind=link}
){kind=link}